The first tranche of JobKeeper ends on 27 September 2020. Those needing further support willneed to reassess their eligibility and prove an actual decline in turnover.
To receive JobKeeper from 28 September 2020, eligible employers need to assess their decline in turnover with reference to actual GST turnover for the September 2020 quarter (for JobKeeper payments between 28 September to 3 January 2021), and again for the December 2020 quarter (for payments between 4 January 2021 to 28 March 2021).
From 28 September 2020, the JobKeeper payment rate will reduce and split into a higher and lower rate based on the number of hours the employee worked in a specific 28 day period prior to 1 March 2020 or 1 July 2020.
To access JobKeeper payments from 28 September 2020, there are three questions that need to be assessed:
We’ve summarised the key details in this update.
Let us know if we can assist you in any way.
From 28 September 2020, the eligibility tests to access JobKeeper for employers will change, as will the amount of the JobKeeper payment for employees and business participants. To receive JobKeeper from 4 January 2021, employers will need to assess their eligibility again.
Eligibility for one JobKeeper period does not entitle you to, or exclude you from, payments in another period. Each eligibility period is addressed separately. That is, there might be businesses that qualified for the first tranche of JobKeeper, don’t qualify for the second tranche but qualify for the third.
An eligible employer is an employer that:
|15% or more||50% or more||30% or more|
|ACNC-registered charity (excluding universities, |
or schools within the
meaning of the GST Act – these entities need to meet the basic turnover test)
|Large businesses where aggregated |
turnover for the test period is:
· likely to be $1 billion
or more; or
· aggregated turnover for the previous year to the test period was $1 billion or more
A small business that forms part of a group that is a large business must have a >50% decline in turnover to satisfy the test.
|All other qualifying entities|
1 March 2020 is an absolute date. An employer that had ceased trading before 1 March, commenced after 1 March 2020, or was not pursuing its objectives in Australia at that date, is not eligible.
*Additional tests apply from 28 September 2020.
will be eligible for the JobKeeper payment if the following conditions are met:
As at 1 March 2020, the individual satisfied all of the following:
If the criteria have been met, the individual is eligible if they were actively engaged in the business in the fortnight of the JobKeeper payment, and they agreed to be nominated for JobKeeper payments and confirmed they pass the eligibility criteria.
If more than one director wants to access JobKeeper payments, they need to meet the eligibility criteria of an employee (see Eligible employees). To be an employee a director would have received salary/wages and this has been reported as salary/wages on activity statements, payment summaries, tax returns etc. If a director merely receives a distribution from the business then they are unlikely to be an employee.
For businesses already enrolled in JobKeeper, to receive payments from 28 September 2020, you need to meet an extended decline in turnover test based on actual GST turnover. Businesses that are enrolling for the first time, need to meet the basic eligibility test and the decline in turnover test/s for the relevant period.
|30 Mar to 27 Sept 2020||28 Sept to 3 Jan 2021||4 Jan 2021 to 28 Mar 2021|
|Decline in turnover test||Projected GST turnover for a relevant month or quarter is expected to fall by at least 30% (15% for |
ACNC-registered charities, 50% for large businesses) compared to the same period in 2019.*
|Actual GST turnover in the September 2020 quarter (July, August & September) fell by at least 30% (15% for ACNC-registered charities, 50% for large businesses) compared to the same period in 2019.*||Actual GST turnover in the December 2020 quarter (October, November & December)fell by at least 30% (15% for ACNC-registered charities, 50% for large businesses) compared to the same period in 2019.*|
* Alternative tests may apply
Most businesses will generally use their Business Activity Statement (BAS) reporting to assess eligibility. However, as the BAS deadlines are generally not until the month after the end of the quarter, eligibility for JobKeeper will need to be assessed in advance of the BAS reporting deadlines to meet the wage condition for eligible employees.
The ATO has the power to extend the time an entity has to pay employees in order to meet the wage condition. For the JobKeeper fortnights starting 28 September 2020 and 12 October 2020 the ATO is allowing employers until 31 October 2020 to meet the wage condition for all employees included in the JobKeeper scheme.
Calculating GST turnover for tranches 2 and 3 of JobKeeper is different to the original JobKeeper requirements as entities will only be using current GST turnover figures (not projected GST turnover).
When applying the new turnover reduction tests for the September 2020 quarter and December 2020 quarter, entities that are registered for GST must use the same method that is used for GST reporting purposes. That is, if the entity is registered for GST on a cash basis then a cash basis needs to be used to calculate current GST turnover for the purpose of these new tests. Entities that are not registered for GST can choose whether to calculate GST turnover using a cash or accruals basis, but must use a consistent method.
Current GST turnover includes proceeds from the sale of capital assets, unless the sale is input taxed. Current GST turnover includes taxable and GST-free supplies, but should exclude input taxed supplies such as residential rental income and financial supplies like dividends, interest etc. JobKeeper and ATO cash flow boost payments should be excluded from the calculation along with other payments that don’t represent consideration for a supply made by the entity such as certain State based grants.
The Commissioner of Taxation has the power to set out alternative tests that establish eligibility in specific circumstances where it is not appropriate to compare actual turnover in a quarter in 2020 with actual turnover in a quarter in 2019. The Commissioner provided a number of alternative tests that could be used for passing the original decline in turnover test and the ATO has indicated that similar tests are likely to be available for the additional decline in turnover tests for the September 2020 and December 2020 quarters, but these have not been released as yet.
A number of modifications apply to not for profit entities when it comes to calculating GST turnover under the original decline in turnover test. It appears that the same modifications will generally also apply when determining whether a not for profit entity passes the new decline in turnover tests for the September 2020 and December 2020 quarters.
To be eligible to receive JobKeeper payments, the employer must meet a wage condition. That is, employers must have paid the eligible employee at least the applicable JobKeeper payment for the relevant fortnight.
The ATO reimburses the employer for the JobKeeper payment monthly in arrears.
As noted above, for the JobKeeper fortnights starting 28 September 2020 and 12 October 2020 the ATO is allowing employers until 31 October 2020 to meet the wage condition for all employees included in the JobKeeper scheme.
From 3 August 2020, the eligibility tests for employees were changed to enable a greater number of employees to access JobKeeper.
Previously, an employee had to be employed by the relevant entity on 1 March 2020 to be eligible for JobKeeper payments. Someone employed as a casual on that date also must have been employed on a regular and systematic basis for the 12 month period leading up to 1 March 2020.
Now, employees who were previously ineligible for JobKeeper because they were not employed by the entity on 1 March 2020 may be able to receive JobKeeper payments if they were employed by the entity on 1 July 2020 and can fulfil all of the other eligibility requirements. If an employee already passed all the relevant conditions at 1 March 2020 then they don’t need to be retested using the 1 July 2020 test date.
*A ‘long term casual employee’ is a person who has been employed by the business on a regular and systematic basis during the period of 12 months that ended on the applicable testing date (previously 1 March 2020, but changing to 1 July 2020). These are likely to be employees with a recurring work schedule or a reasonable expectation of ongoing work.
From 28 September 2020, the payment rate for JobKeeper will taper from the flat rate of $1,500 and split into a higher and lower rate.
|JobKeeper payment||30 Mar to 27 Sept 2020||28 Sept to 3 Jan 2021||4 Jan to 28 Mar 2021|
|Worked 80 hours or more in the reference period||$1,500 per fortnight per employee||$1,200 per fortnight per employee or business participant||$1,000 per fortnight per employee or business participant|
|Worked less than 80 hours in the reference period||$750 per fortnight per employee or business participant||$650 per fortnight per employee or business participant|
|Reference period||28 Sept to 3 Jan 2021|
|Eligible employees||The 28 days finishing on the last day of the last pay period that ended before either:|
1 March 2020, or
1 July 2020
|Actual hours worked including any hours for which they received paid leave (e.g., annual, long service, sick, carers and other forms of paid leave) or paid absence for public holidays. An employee’s ‘actual’ hours might be different to their contracted, ordinary hours or hours they are paid for.|
|Eligible business participants||February 2020 (29 days)||Active engagement in the business|
|Religious practitioners||February 2020 (29 days)||Activities in pursuit of your vocation for your institution|
Eligible employees that have been employed on a full time basis since 1 March 2020 or 1 July 2020 will generally receive the higher JobKeeper rate (as full time employees work more than 80 hours in 28 days) .
Businesses however will need to determine the rate applicable to eligible part-time and casual employees.
The reference period is the 28 day ending at the end of the most recent pay cycle for the employee ending before:
For eligible employees who have been employed since 1 March 2020, employers need to choose the reference period that provides the best outcome for the employees. For many employers, this will be the pre COVID-19, 1 March 2020 reference date.
For eligible employees employed since 1 July 2020, use the pay periods prior to 1 July 2020.
If the pay cycle is longer than 28 days, a pro-rata calculation needs to be done to determine the average hours worked and on paid leave across an equivalent 28 day period. For example, if the relevant monthly pay cycle has 31 days, you take the total hours for the month and multiply this by 28/31.
In order for an employer to receive JobKeeper payments from 28 September 2020 onwards they must notify the ATO of the payment rates for all eligible employees. The employer must then notify its employees within 7 days of advising the ATO of the payment rate.
Emma has been a permanent part-time employee of a bus company since 2010.
The company has a fortnightly pay cycle ending on Fridays. The bus company is an eligible employer as they have suffered a decline in turnover of more than 30%.
Using the company’s payroll cycle, Emma’s hours for the 1 July 2020 reference period are:
|23 May 2020 to 5 June 2020||Week 1|
|6 June 2020 to 19 June 2020||Week 3|
19 annual leave
Emma’s annual leave in February is included in her total hours as any hours for which an employee received paid leave (e.g., annual, long service, sick, carers and other forms of paid leave) or paid absence for public holidays, are included.
Emma’s hours for the 1 March 2020 reference period are:
|1 February 2020 to 14 February 2020||Week 1|
|15 February 2020 to 28 February 2020||Week 3|
Assuming the bus company continues to be eligible for JobKeeper payments, the company is eligible to receive the higher rate of $1,200 per fortnight between 28 September 2020 to 3 January 2021 for Emma, and $1,000 per fortnight for 4 January 2021 to 28 March 2021 assuming Emma remains employed. This is because Emma worked 80 hours or more for the 1 March 2020 reference period. Had she worked less than 80 hours, she would be eligible for the lower rate of JobKeeper.
Antonio has been a permanent employee of Lai Industries since 2010.
The company has a monthly pay cycle that ends of the 15th of each month. The company is an eligible employer as they have suffered a decline in turnover of more than 30%.
Using the company’s payroll cycle, Antonio’s hours for the 1 July 2020 reference period are:
|16 May 2020 to 15 June 2020 (31 days)||85|
|Total hours over payroll period||85|
|Total Hours over 28 day reference period||76.8|
As the reference period is 28 days, Lai Industries need to pro-rata Antonio’s hours. 28 days/ 31 day payroll period x 85 (total hours worked over payroll period) = 76.8 hours
Antonio’s hours for the 1 March 2020 reference period are:
|16 January 2020 to 15 February 2020 (31 days)||85 worked|
|Total hours over payroll period||165|
|Total Hours over 28 day reference period||149|
28 days/ 31 day payroll period x 165 (total hours worked over payroll period) = 149 hours. Assuming the Lai Industries continues to be eligible for JobKeeper payments, the company is eligible to receive the higher rate of $1,200 per fortnight between 28 September 2020 to 3 January 2021 for Antonio, and $1,000 per fortnight for 4 January 2021 to 28 March 2021 assuming Antonio remains employed.
Alternative tests are available where:
Where the reference period is not typical of an employee’s hours, for example they took unpaid leave, or your business was in a drought or bushfire zone, or the employee was stood down etc., you can use an earlier 28 day period or multiple 28 day periods that more accurately represent the employee’s typical arrangements.
The reference period becomes the 28 day period ending at the end of the most recent pay cycle for the employee before 1 March 2020 or 1 July 2020 in which the employee’s total number of hours of work, of paid leave and of paid absence on public holidays was representative of a typical 28-day period. That is, you select the next 28 day period before 1 March 2020 or 1 July 2020 that represents the employee’s typical employment pattern.
George has been a permanent part-time employee of a restaurant since 2018.
The company has a fortnightly pay cycle ending on Fridays. The restaurant is an eligible employer as they have suffered a decline in turnover of more than 30%. George did not work in May or June 2020.
Using the company’s payroll cycle, George’s hours for the 1 March 2020 reference period are:
|1 February 2020 to 14 February 2020||Week 1|
|15 February 2020 to 28 February 2020||Week 3|
|0 unpaid leave|
George typically works a minimum of 18 hours in any given week. However, in week 3, George took unpaid leave. As week 3 is not typical of George’s arrangement, the restaurant uses another 28 day period before 1 March 2020 that is typical of his arrangements.
|4 January 2020 to 17 January 2020||Week 1|
|18 January 2020 to 31 January 2020||Week 3|
Using the alternative test, George is eligible for the higher JobKeeper rate.
For workers that don’t have a typical pattern because of a rostering system like fly-in-fly-out workers, an average of the hours worked over the employee’s rostering schedule and proportionally adjusted over 28 days can be used to work out a typical 28-day period.
Where an employee started work during the 28 days prior to either 1 March 2020 or 1 July 2020, you can use a forward-looking alternative test. In these circumstances, use the pay cycle immediately on or after 1 March 2020 or 1 July 2020. For employers with fortnightly or weekly pay cycles, you must use consecutive weeks.
Where an employee was stood down, use the first 28 day period starting on the first day of a pay cycle on or after 1 March 2020 or on or after 1 July 2020 in which they were not stood down.
Where the business changed hands or the employee changed employment within a wholly owned group, the hours worked with the previous employer cannot be counted. Instead, use the pay cycle immediately on or after 1 March 2020 or 1 July 2020. For employers with fortnightly or weekly pay cycles, you must use consecutive weeks.
If the employee has been stood down, use the first 28 day period starting on the first day of a pay cycle on or after 1 March 2020 or on or after 1 July 2020 in which they were not stood down.
Some employees will automatically qualify for the higher JobKeeper payment rate. Broadly, this applies if the employer has incomplete records of total hours of work and paid leave, including where salary, wages, commissions, bonuses etc are not tied to an hourly rate or contracted rate.
The employee must also fall within specific categories, including:
The reference period for business participants is the month of February 2020 (the whole 29 days).
A business participant is a sole trader or self-employed with an ABN, or one partner in a partnership, adult beneficiary of a trust, director or shareholder who works in the business (i.e., only one person in a partnership, one beneficiary of a trust, or one director / shareholder can be eligible for JobKeeper payments for a particular entity).
The test to determine eligibility is based on the hours of active engagement in the business carried on by the entity. This requires an assessment of the hours that the business participant was actively operating the business or undertaking specific tasks in business development and planning, regulatory compliance or similar activities in an applicable reference period.
Other than sole traders and self-employed, a business participant must provide a declaration to the business entity confirming their hours worked over the reference period.
For JobKeeper payments from 28 September 2020, the business must notify the Tax Commissioner about whether the higher or lower rate applies to the business participant and notify the participant within 7 days of providing this notice to the Commissioner.
Where February 2020 was not typical of the participant’s hours, an alternative test can be used:
The reference period for eligible religious practitioners is the month of February 2020.
A religious practitioner is a minister of religion or a full time member of a religious order who undertakes activities in pursuit of their vocation as a member of a religious institution.
The payment rates are based on the number of hours they spent doing an activity, or series of activities, in pursuit of their vocation as a religious practitioner as a member of the religious institution in the reference period. For example:
The religious practitioner must provide a declaration to their institution confirming their hours worked over the reference period.
For JobKeeper payments from 28 September 2020, religious institutions must notify the Tax Commissioner about whether the higher or lower rate applies to each of their eligible religious practitioners and notify the practitioner within 7 days of providing this notice to the Commissioner.
Where February 2020 was not typical of the practitioner’s hours, an alternative test can be used: